Edit: I am trying to put linux on a compaq armada 1700.

  • billwashere@lemmy.worldEnglish
    194·
    4 months ago

    Is nobody gonna ask?!? Why do you have a pentium 2? I like old hardware as much or more than the next guy but man that’s old. And this from a guy who has a working Commodore 64 🤣

      • billwashere@lemmy.worldEnglish
        61·
        4 months ago

        Oh I get it. I hate to see hardware that could be useful being thrown out. Hence the reason I have stacks of 1TB hard drives with no real use.

        I have a long term goal of running my home automation system on that commodore for no other reason than it’s weird. So I get it.

    • deltapi@lemmy.world
      5·
      4 months ago

      I’ve got a 500mhz Celeron from the P3 days, it runs OS/2 and has an ISA EPROM burner card in it.

  • Psiczar@aussie.zone
    151·
    4 months ago

    Shit, I’ve thrown out stuff several generations newer than that because it was too old.

  • Possibly linux@lemmy.zipEnglish
    10·
    4 months ago

    The Linux kernel works fine. How much ram do you have? I personally would build a custom image with buildroot.

    Other option is Debian

    • aksdb@lemmy.world
      4·
      4 months ago

      Fli4l is still around?! Crazy. I used that back in 2002 or so to turn an old i386 with 3 ISA HP 100Mbit network cards into a router + fileserver combo. Good times.

  • Eugenia@lemmy.mlEnglish
    4·
    4 months ago

    With 32MB of RAM you can’t go far. The Linux kernel barely runs on it, and that’s just the kernel. NetBSD also has a minimum requirement of 32GB of RAM. One other thing you can do is try to run BeOS (not Haiku, but BeOS). It could run on 32MB of RAM (it still preferred 64 MB, but it could run on 32 too).

    • data1701d (He/Him)@startrek.websiteEnglish
      2·
      4 months ago

      With 48 MB, you can, though. That’s what I booted 5.17 on a Pentium II with once to get a basic busybox terminal. I think I did an experiment once with qemu and found the minimum to be somewhere in the high 30s or low 40s.

  • TCB13@lemmy.worldEnglish
    84·
    4 months ago

    Frankly the power consumption of that thing x performance delivered will be just bad. Take for example this example, a more modern Pentium D vs a Pi:

    If you don’t have any kind of attachment to the machine, just trash it, get a Pi or a second hand 8th Gen i5 HP Mini for around 80$ and enjoy. If you do have an attachment to the machine you may as well run some OS from the same era. https://winworldpc.com/library/operating-systems

  • ashughes@feddit.uk
    3·
    4 months ago

    As others have suggested, the only option I can think of is Tinycore but you’ll need to get the Microcore version (aka Core ISO with no GUI). This should run on 32MB RAM but leaves you very little headroom with a very barebones install, and obviously no GUI of any kind. [Source]

    I looked up the Compaq Armada 1700 and saw that it came with 32MB soldered with one slot available to expand up to 160MB. It’s a long shot, but if you can find a working 32MB, 64MB or 128MB memory module for this you should be able to run TinyCore with a GUI. Adding more RAM would also open up options like Slackware.

    It’s not clear to me if Debian will work or not, even with maxing out the RAM in this computer. There is a low memory install mode you could try but I think even that requires at least 256MB which is beyond the theoretical maximum this computer supports.

    If all you want to do is prove to yourself that you can install Linux on this computer then Microcore might be worth a try. If you want a usable system with a GUI then you’re probably going to have to add more RAM.

    This could be a long shot, but so long as you do NOT connect it to the internet, you could try sourcing a Linux distribution from back when this computer was released, I’m thinking Redhat Linux (before RHEL and Fedora was a thing) or Debian a very old version of Debian. However even if you do succeed in this it’s probably not going to be usable.

    Good luck!