I didn’t know what a dual clutch transmission was and found this excellent video while searching. Figured I would share it here. Pretty awesome! You get the direct gearing benifits of a manual with the shifting ease and speed of an automatic.
I once had a Veloster with a dry plate dual clutch. Identical in design to a standard manual, just with a different clutch system and input shafts design, and computery bits controlling it.
If you drove it the way you drive a stick, it would last a long time.
Got almost 175,000 miles on it before it had any problems. At that mileage, the car was well and truly worn out, so not worth fixing, but I would have fixed the problem (failed 2nd clutch motor, common issue on the KIA/Hyundai DCT) if the car wasn’t all worn out.
My friend has a Veloster with the DCT. My favorite feature is that the car has hill hold, but it still rolls back like a manual transmission half the time.
Also the DCT gets confused pretty easily. At least once in a 15 minute drive I’ll have it fail to shift properly and the whole car jitters. Or it just picks the wrong gear then immediately has to shift again.
The first part, yeah, if you’re on a shallow incline it doesn’t hill hold. But you also should never hill hold with the clutch anyway, so keep that foot on the brake until its time to go. Worst case, you left foot brake to get it to preload and then immediately let off the brake. But I never really needed to do that.
The second part could be an early warning sign of the second clutch motor failure. I remember it only started going a gear too low not too long before it went completely, if I had it on auto shift. I ran it in manual mode almost all the time, though.
I didn’t know what a dual clutch transmission was and found this excellent video while searching. Figured I would share it here. Pretty awesome! You get the direct gearing benifits of a manual with the shifting ease and speed of an automatic.
https://youtu.be/AeAh2KCvE2I
I once had a Veloster with a dry plate dual clutch. Identical in design to a standard manual, just with a different clutch system and input shafts design, and computery bits controlling it.
If you drove it the way you drive a stick, it would last a long time.
Got almost 175,000 miles on it before it had any problems. At that mileage, the car was well and truly worn out, so not worth fixing, but I would have fixed the problem (failed 2nd clutch motor, common issue on the KIA/Hyundai DCT) if the car wasn’t all worn out.
My friend has a Veloster with the DCT. My favorite feature is that the car has hill hold, but it still rolls back like a manual transmission half the time.
Also the DCT gets confused pretty easily. At least once in a 15 minute drive I’ll have it fail to shift properly and the whole car jitters. Or it just picks the wrong gear then immediately has to shift again.
The first part, yeah, if you’re on a shallow incline it doesn’t hill hold. But you also should never hill hold with the clutch anyway, so keep that foot on the brake until its time to go. Worst case, you left foot brake to get it to preload and then immediately let off the brake. But I never really needed to do that.
The second part could be an early warning sign of the second clutch motor failure. I remember it only started going a gear too low not too long before it went completely, if I had it on auto shift. I ran it in manual mode almost all the time, though.
It’s been stupid like that for 7 years now. I think the transmission is just stupid.