It looks like !buildapc community isn’t super active so I apologize for posting here. Mods, let me know if I should post there instead.

I built my first PC when I was I think 10-11 years old. Built my next PC after that and then sort of moved toward pre-made HP/Dell/etc. My last PC’s mobo just gave out and I’m looking to replace the whole thing. I’ve read over the last few years that prefabs from HP/Dell/etc. have gone to shit and don’t really work like they used to. Since I’m looking to expand comfortably, I’ve been thinking of giving building my own again.

I remember when I was a young lad, that there were two big pain points when putting the rig together: motherboard alignment with the case (I shorted two mobos by having it touch the bare metal of the grounded case; not sure how that happened but it did) and CPU pin alignment so you don’t bend any pins when inserting into the socket.

Since it’s been several decades since my last build, what are some things I should be aware of? Things I should avoid?

For example, I only recently learned what M.2 SSD are. My desktop has (had) SATA 3.5" drives, only one of which is an SSD.

I’ll admit I am a bit overwhelmed by some of my choices. I’ve spent some time on pcpartpicker and feel very overwhelmed by some of the options. Most of my time is spent in code development (primarily containers and node). I am planning on installing Linux (Ubuntu, most likely) and I am hoping to tinker with some AI models, something I haven’t been able to do with my now broken desktop due to it’s age. For ML/AI, I know I’ll need some sort of GPU, knowing only that NVIDIA cards require closed-source drivers. While I fully support FOSS, I’m not a OSS purist and fully accept that using a closed source drivers for linux may not be avoidable. Happy to take recommendations on GPUs!

Since I also host a myriad of self hosted apps on my desktop, I know I’ll need to beef up my RAM (I usually go the max or at least plan for the max).

My main requirements:

  • Intel i7 processor (I’ve tried i5s and they can’t keep up with what I code; I know i9s are the latest hotness but don’t think the price is worth it; I’ve also tried AMD processors before and had terrible luck. I’m willing to try them again but I’d need a GOOD recommendation)
  • At least 3 SATA ports so that I can carry my drives over
  • At least one M.2 port (I cannibalized a laptop I recycled recently and grabbed the 1TB M.2 card)
  • On-board Ethernet/NIC (on-board wifi/bluetooth not required, but won’t complain if they have them)
  • Support at least 32 GB of RAM
  • GPU that can support some sort of ML/AI with DisplayPort (preferred)

Nice to haves:

  • MoBo with front USB 3 ports but will accept USB 2 (C vs A doesn’t matter)
  • On-board sound (I typically use headphones or bluetooth headset so I don’t need anything fancy. I mostly listen to music when I code and occasionally do video calls.)

I threw together this list: https://pcpartpicker.com/list/n6wVRK

It didn’t matter to me if it was in stock; just wanted a place to start. Advice is very much appreciated!

EDIT: WOW!! I am shocked and humbled by the great advice I’ve gotten here. And you’ve given me a boost in confidence in doing this myself. Thank you all and I’ll keep replying as I can.

  • @grue@lemmy.worldEnglish
    37•9 months ago

    Well, let’s see:

    • You no longer have to set jumpers to “master” or “slave” on your hard drives, both because we don’t put two drives on the same ribbon cable anymore and because the terminology is considered kinda offensive.

    • Speaking of jumpers, there’s a distinct lack of them on motherboards these days compared to the ones you’re familiar with: everything’s got to be configured in firmware instead.

    • There’s a thing called “plug 'n play” now, so you don’t have to worry about IRQ conflicts etc.

    • Make sure your power supply is “ATX”, not just “AT”. The computer has a soft on/off switch controlled through the motherboard now – the hard switch on the PSU itself can just normally stay on.

    • Cooling is a much bigger deal than it was last time you built a PC. CPUs require not just heat sinks now, but fans too! You’re even going to want some extra fans to cool the inside of the case instead of relying on the PSU fan to do it.

    • A lot more functionality is integrated onto motherboards these days, so you don’t need nearly as big a case or as many expansion slots as you used to. In fact, you could probably get by without any ISA slots at all!

    • @Spiralvortexisalie@lemmy.worldEnglish
      5•9 months ago

      While I love this list, it is more applicable to the turn of the century than a a decade ago. I was half expecting to see “ram no longer has to be installed in pairs” on the list.

      ETA: Talking about EDO memory not dual channel

      • @Rehwyn@lemmy.worldEnglish
        8•9 months ago

        I think you may have misread OPs post. They haven’t built a PC since shirtly after they were 10-11, which was almost 30 years ago. So developments since the turn of the century are in fact relevant here, heh.