Comcast says it represents a 10 Gigabit cable internet network they are building (it doesn’t exist) so they are basically changing the meaning of the g from generation to gig to act like 10g is 5 generations better (or twice as fast)…or that they have a 10 gigabit network. Neither is accurate. It’s still just cable internet that people have to use because they have no other option.

Fuck Comcast.

I read online they are abandoning the “confusing” 10g branding but I just saw a commercial for it. They think all of their customers are morons and count on folks having no other choices in a lot of cases.

Apologies to anyone outside the United States, this is just complaining about our poor internet options and deceptive advertising by greedy corporations.

  • BlameThePeacock@lemmy.ca
    link
    fedilink
    English
    arrow-up
    146
    arrow-down
    2
    ·
    10 months ago

    Screen manufacturers just did a similar thing with the jump from 1080p to 4k

    The 1080 part of the original number referred to the number of pixels from top to bottom, 4k refers to left to right. 4k is actually only 2160 from top to bottom though (at the same aspect ratio).

    So they quadrupled the number when it should have only doubled, and it was entirely a marketing thing.

    • Alto@kbin.social
      link
      fedilink
      arrow-up
      59
      arrow-down
      1
      ·
      10 months ago

      Don’t even get me started on the bullshit that is calling 1440p 2k

    • Alexstarfire@lemmy.world
      link
      fedilink
      English
      arrow-up
      47
      arrow-down
      6
      ·
      10 months ago

      There are 4x the pixels so…

      I don’t disagree with the change either. Having a large number makes it more difficult to compare. After 2160 it’s 4320. 2k, 4k, and 8k are far easier to remember and figure out the differences.

      • driving_crooner@lemmy.eco.br
        link
        fedilink
        English
        arrow-up
        20
        arrow-down
        1
        ·
        10 months ago

        In my past life I was a video editor while 4k was still at its infancy, and my coworker was furious saying that reporters were idiots for saying that 4K was 4 times the size of HD, it was just the name. And I’m like, dude is actually 4 times more and show him a picture of the size comparison of both and he was really ashamed, but I told him it was ok because I was also thinking the same until I read an article about it.

      • GluWu@lemm.ee
        link
        fedilink
        English
        arrow-up
        15
        arrow-down
        1
        ·
        edit-2
        10 months ago

        Exactly. The up tick in resolution was slow, 360 to 480 to 720 to 1080. Relatively small improvements. Then we jump to 2160/4k and the resolution goes up by 400% from the previous 1080. 4k is 4x1080 screens put together.

        • soggy_kitty@sopuli.xyz
          link
          fedilink
          English
          arrow-up
          6
          arrow-down
          5
          ·
          10 months ago

          1440 was a thing when 2160 released. 4k is a shit name because it infers you know what generation it’s 4 times the size of

      • Turun@feddit.de
        link
        fedilink
        English
        arrow-up
        7
        ·
        edit-2
        10 months ago

        There are 4x the pixels so…

        Totally agree, but then

        2k, 4k, and 8k

        Is internally inconsistent!

        If 4k is four times the pixel count of 1080, then 2k means 1440 (-ish, it should be 1530) - that’s fine. But then 8k must be 3050, but it is actually 4320!!!

        So it can not refer to the number of pixels (quadratic scaling). On the other hand, if we assume linear scaling and 8k is 4320 and 4k is 2160, then 2k is 1080 - but 2k is never used in that context!

        Edit: as you can see I’m very passionate about this XD

        • Alexstarfire@lemmy.world
          link
          fedilink
          English
          arrow-up
          2
          ·
          10 months ago

          Eww, who refers to 1440p as 2k? 1080p is 2k. Not that anyone really says 2k to begin with.

          That said, that particular instance is irrelevant as long as things are consistent going forward.

          • GreatAlbatross@feddit.uk
            link
            fedilink
            English
            arrow-up
            3
            ·
            edit-2
            10 months ago

            2048x1080 is DCI 2K.

            The slight difference between the ratios is why home releases of films often have small black bars at the top and bottom, as the DCI flat ratio is slightly different than 16:9.

    • Scrubbles@poptalk.scrubbles.tech
      link
      fedilink
      English
      arrow-up
      17
      arrow-down
      1
      ·
      10 months ago

      Why marketers are allowed to label the speed of a network is just beyond me as an engineer. Call it whatever you want. “Our Purple speed”. Don’t care. But underthat it should be labeled with a standard 1gbps/1gbps.

      That would shut up xfinity’s bullshit claims pretty quick. “Our new Plaid speed fiber” 200mbps/4mbps

      Seriously I called them years ago asking about fiber, they were real hyped, they bragged they could give me 800! 800 what I asked. Megabytes! Megabytes or Megabits? 800 Megabits, okay fine, symmetric right? Well, no one uses upload anyway. That was their literal response.

      • vithigar@lemmy.ca
        link
        fedilink
        English
        arrow-up
        7
        ·
        10 months ago

        symmetric right?

        I talked about this in another thread recently, but my favorites are the ones that are so lopsided that you literally can’t send back ACKs fast enough to keep up with your own download speeds when using TCP.

        • Scrubbles@poptalk.scrubbles.tech
          link
          fedilink
          English
          arrow-up
          2
          arrow-down
          1
          ·
          10 months ago

          I’ve had that! Upload so bad that I couldn’t even send out a request! Even the DNS requests failed. “But you have download available”. Yes, mr customer service, but how does it know what to download?

      • NateNate60@lemmy.world
        link
        fedilink
        English
        arrow-up
        6
        ·
        edit-2
        10 months ago

        Download-only internet.

        Your water line is now connected! There is no way to turn on the taps in the house.

    • Krafting@lemmy.world
      link
      fedilink
      English
      arrow-up
      19
      arrow-down
      5
      ·
      10 months ago

      But at least 4k is indeed 4 times bigger than 1080p, at least in terms of pixels, so it’s not all bullshit in a way

      • soggy_kitty@sopuli.xyz
        link
        fedilink
        English
        arrow-up
        8
        arrow-down
        4
        ·
        10 months ago

        I like to call 1440 “4k” as well because it’s 4 times bigger than 720. Stupid fucking naming system

        • accideath@lemmy.world
          link
          fedilink
          English
          arrow-up
          11
          ·
          edit-2
          10 months ago

          4K refers to the horizontal resolution of the video, not how much larger than FullHD it is.

          Also 1440p is sometimes called QHD (Quad HD) because it’s 4x 720p aka HD

          The correct naming scheme btw, if you don’t subscribe to bad marketing:

          640x480 = SD (NTSC)

          768x576 = SD (PAL)

          1280x720 = HD

          1920x1080 = FullHD/FHD

          2048x1080 = DCI 2K

          2560x1440 = QuadHD/QHD

          3840x2160 = UHD

          4096x2160 = DCI 4K

          7680x4320= UHD2

          • accideath@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            ·
            10 months ago

            The K refers to horizontal resolution though. The Resolution used for cinema are 2048x1080 aka DCI 4K and 4096x2160 aka DCI 4K. TV manufacturers thought it would be fun to market UHD aka 3840x2160 as 4K, which it isn’t. It‘d be 3.8K if you’d have to label it like that.

    • accideath@lemmy.world
      link
      fedilink
      English
      arrow-up
      7
      ·
      10 months ago

      And 4K isn‘t even correct in the horizontal direction. “4K” TVs have a horizontal resolution of 3840 pixels. That’s 3.8K. True 4K, as used in movie production (aka DCI 4K) is 4096x2160

    • Artyom@lemm.ee
      link
      fedilink
      English
      arrow-up
      7
      ·
      10 months ago

      The worst part is that it’s actually less than 4k pixels on the top.

    • Kbobabob@lemmy.world
      link
      fedilink
      English
      arrow-up
      6
      ·
      10 months ago

      2160p is not that uncommon though. Saying 4K is just an abbreviation and it’s easier to say while still letting everyone know what you’re talking about. I don’t actually like the term 4K though because it’s a bit ambiguous because of how many different flavors of 4K there are.

    • Ultraviolet@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      arrow-down
      1
      ·
      10 months ago

      It’s actually even worse. They tried to pass off 2048x1080 as a big upgrade over 1920x1080 by marketing it as “2K”. It didn’t work, but locked marketing into using the horizontal resolution.

      • accideath@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        10 months ago

        That’s actually being used in the context of movie production. It’s called DCI 2K. Same with DCI 4K, which is 4096x2160 and thus actual 4K

    • mysoulishome@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      21
      arrow-down
      1
      ·
      10 months ago

      They say that but are running the ads this very night during college basketball games…

      • kjake@infosec.pub
        link
        fedilink
        English
        arrow-up
        8
        ·
        edit-2
        10 months ago

        Yeah, it’s still confusing. It could be that since the ruling was made less than a month ago, there are active ad campaigns that they’re just going to let run their course, rather than cancel them.

        But also, note the following from the source article:

        Comcast said it may still use 10G in ways that are less likely to confuse consumers. “Consistent with the panel’s recommendation… Comcast reserves the right to use the term ‘10G’ or ‘Xfinity 10G’ in a manner that does not misleadingly describe the Xfinity network itself,” the company said.

        When contacted by Ars, a Comcast spokesperson said, “We disagree with the decision but are pleased that we have confirmed our continued use of 10G in advertising.”

        So maybe Ars overstepped in their headline?

  • littlecolt@lemm.ee
    link
    fedilink
    English
    arrow-up
    58
    arrow-down
    4
    ·
    10 months ago

    You are conflating Internet service speed and mobile generations. I work for an ISP. I hear this all the time. Especially since there’s also “5G WiFi” which is 5 GHz band. People confuse it all, and it’s understandable but still annoying.

    My company offers 1 Gbps service. No one is getting confused by that yet, but our modems have 2.5 Gbps Ethernet ports now, and I had a customer that was outraged the other day because “Your modem is only 2.5 G and all my devices use 5G! You need to send me a 5G modem!!” FFS

    • Nougat@kbin.social
      link
      fedilink
      arrow-up
      21
      ·
      10 months ago

      Sure, but they really should be describing it as 10Gb (gigabit). Even that could easily get confused with 10GB (gigabyte), which would be used for a file size.

        • BorgDrone@lemmy.one
          link
          fedilink
          English
          arrow-up
          3
          ·
          10 months ago

          Not just internet providers. Data communication speeds have always been in bits per second. Historically it makes perfect sense.

          Specifying speed in bytes per second would be inconvenient because while we settled on 8 bits per byte in the early days of computing this was not the case. 6-bit bytes were common, but other sizes were used too, 7,8, 9, 10 and sometimes even larger.

          So when you’re talking about communication between different types of computers with different size bytes, it would be confusing to use bytes/second as a unit.

          • vithigar@lemmy.ca
            link
            fedilink
            English
            arrow-up
            1
            ·
            edit-2
            10 months ago

            Even now that we’ve by and large settled on 8 bits per byte it’s still useful to call out the communication rate as distinct from the actual payload data transfer rate, as there are other sources of overhead.

            You’ll never actually see a 1MB/s transfer over an 8Mbps connection because some of those bits are going to be used for things like packet headers, keep alive messages, etc.

      • littlecolt@lemm.ee
        link
        fedilink
        English
        arrow-up
        1
        ·
        edit-2
        10 months ago

        I think you’ll find, if your look deep, that the average customer IS DUMB AS FUCKING BRICKS AND DOESN’T KNOW WHAT FROM WHAT, BIG NUMBER GOOD

  • givesomefucks@lemmy.world
    link
    fedilink
    English
    arrow-up
    39
    arrow-down
    2
    ·
    edit-2
    10 months ago

    Pretty sure they’re getting sued on 10g.

    But 5g is bullshit too.

    The telecoms agreed what threshold of improvement warranted a “new g” but they sell more funa when the number goes up.

    So they started making up sub versions of 4g and then all agreed to have 5g before meeting the threshold for it.

    • burrito@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      16
      ·
      10 months ago

      Yep, this is exactly it. When 3g was going away and 4g was starting up, T-Mobile pulled the same thing trying to brand their UMTS stuff as 4g when it’s clearly a 3g protocol. You can always rely on the marketers to lie until the end of time.

  • RickRussell_CA@lemmy.world
    link
    fedilink
    English
    arrow-up
    25
    arrow-down
    1
    ·
    10 months ago

    I am so, so, SO glad I’m now in a home with access to fiber Internet. Real, 2 gigabit symmetric fiber.

    The cable company keeps sending me glossy ads in the mail - several per week - trying to get me to go back to 1/4 the bandwidth at the same price. Uhhhh… no.

    • mysoulishome@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      6
      ·
      10 months ago

      Same here. Before fiber came to my suburb I could only choose AT&T or Comcast. AT&T’s fastest plan was 50mbps and never pulled more than 30. They’ve had permits here to put up Verizon 5G towers for 5 years but haven’t built a single one because of the tin foil hat brigade. I would love to switch to Verizon because I’d save a shitload on bundling it with my cell phones. Verizon has LTE but that would be like going back to the DSL.

      • Possibly linux@lemmy.zip
        link
        fedilink
        English
        arrow-up
        2
        ·
        10 months ago

        What you need is to get your neighborhood on board. If you can generate interest they it suddenly becomes more cost effective for a company to install fiber.

      • RickRussell_CA@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        10 months ago

        Spectrum’s “deal” for my location was 500/10 mbps for $90/month “introductory price”. I asked what the price would be at the end of the introductory period, and they refused to tell me.

        Meanwhile, Frontier gives me 2/2 gbps for $100/month, no price changes.

        I have no interest in TV, I don’t even pay for streaming, so at the end of the day Internet performance is all I care about.

    • Nougat@kbin.social
      link
      fedilink
      arrow-up
      1
      ·
      10 months ago

      Our subdivision was built in about 2004. They didn’t put dark fiber in the ground, for some reason. It took about fifteen years for a private company to come in and lay fiber. I had Comcast/Xfinity at the time (I think it was 250Mb, and definitely asynchronous), who had already started sending out their promotions for gigabit internet service, so I called them up to see if I could get that. “That’s only available if you get internet and TV and phone.”

      Oh, so you can give me just gigabit internet, but you won’t give me just gigabit internet.

      It was another year before the fiber service was lit, I was the first person to get it in my neighborhood, and it is absolutely fantastic.

  • skuzz@discuss.tchncs.de
    link
    fedilink
    English
    arrow-up
    23
    ·
    10 months ago

    It was hilariously reading the presser on NBCComcrap talking about how 10G DOCSIS development is progressing and they could almost hit 10Gbps in labs on the downlink but uplink would only be a few hundred megabits tops. Like, none of those numbers are worth selling a marketing brand of “10G”. Real fiber Internet can hit it, my provider offers 10Gbps/10Gbps. That could be called “10G” - if we continued to conflate speed with generations like Comcrap tried to do.

    I really wish the FCC would step up and slap all these companies perpetuating these weird lie terms the last half a decade.

    • mysoulishome@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      10 months ago

      Haha yes it would be nice if the FCC wasn’t beholden to these companies based on their lobbyists flooding money into Washington…

  • pelya@lemmy.world
    link
    fedilink
    English
    arrow-up
    22
    ·
    10 months ago

    ITU defined 4G in 2008 as wireless connectivity with speed of 100 megabits per second for mobile users and 1 gigabit per second for stationary users.

    LTE never achieved such speeds. It did not stop mobile operators from calling their service 4G.

    ITU since then revised their definition to lower the required network speed.

    5G was supposed to have network speeds of 10 gigabits per second. ITU however wisened up and are just defining it as ‘fifth-generation wireless’, because the mobile operators will butcher the definition anyway.

    • tigeruppercut@lemmy.zip
      link
      fedilink
      English
      arrow-up
      17
      ·
      edit-2
      10 months ago

      Pretty funny the blades on disposables actually did top out at 5. The Onion wins the prediction game again.

      (I know there’s a 6 blade brand out there but I think it’s the only one, whereas all the big companies make 5. So glad I got out of the disposables and traded them for safety razors anyway-- dunno why it took me so long)

      • CertifiedBlackGuy@lemmy.world
        link
        fedilink
        English
        arrow-up
        8
        ·
        10 months ago

        Probably fear of cutting yourself with that single blade.

        That’s what took me so long.

        BTW, anyone here who face shaves regularly, switch to a safety razor. This is a threat.

        • tigeruppercut@lemmy.zip
          link
          fedilink
          English
          arrow-up
          4
          ·
          10 months ago

          Yeah gotta admit I was pretty nervous the first couple times, kinda assuming I’d be just shaving and all of a sudden see a long trail of blood appear. After I got used to it though it’s just as fast as using a disposable, and I haven’t cut myself yet

  • DABDA@lemmy.world
    link
    fedilink
    English
    arrow-up
    19
    arrow-down
    1
    ·
    10 months ago

    Because of all the bullshit with subsidies etc. intended for improving broadband infrastructure being abused, my dream is:

    • All the poles & lines (and access rights to them) are nationalized and then opened up for individual ISPs to service. Current ISP exclusivity contracts/agreements should be dissolved. Let them actually compete for customers with price, features and customer service.
    • The government should also offer tax-funded baseline connectivity to everyone since it’s effectively impossible to live in modern society without internet access. The provided speeds must be sufficient for a typical bloated framework-script-heavy site, all (meta)data/packets should be considered constitutionally protected private info not able to be monitored/scraped/sold.
    • Use building out and supporting the above as a useful jobs program instead of more military adjacent stuff.
    • mysoulishome@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      11
      ·
      10 months ago

      You have my vote if you run for office.

      I’ve heard in other countries they have a CHOICE of electricity providers. Boggles my mind. CHOOSE who you buy electricity from? Like more than 1?

      • stewie3128@lemmy.ml
        link
        fedilink
        English
        arrow-up
        4
        ·
        10 months ago

        In Atlanta I had a choice of natural gas companies, even though it would have been cheaper if there were simply one single regulated monopoly.

        Competing utilities are just a way to give out cash to rent-seeking middlemen.

      • The Count@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        10 months ago

        This is the case in the UK. Rare example of where privatisation of a utility went well. Don’t ask about the water

      • IntegrationLabGod@lemm.ee
        link
        fedilink
        English
        arrow-up
        1
        ·
        10 months ago

        Pennsylvania has choice of electricity provider. You pay a line maintenance fee to the line owner of a few cents per kWh, then you have a choice of dozens of providers for the electricity itself.

    • Possibly linux@lemmy.zip
      link
      fedilink
      English
      arrow-up
      1
      ·
      10 months ago

      In my city there is so much completion in the internet space that the prices have dropped significantly. It is also in very high demand as my city is growing extremely fast.

      I’m not sure if it will last but the demand made it cost effective for the internet companies to install fiber everywhere. They literally have trucks and people deploying new fiber lines 5 days a week.

  • brlemworld@lemmy.world
    link
    fedilink
    English
    arrow-up
    17
    ·
    edit-2
    10 months ago

    They should be forced to have a standard like a food label. Should show average speed and uptime for past 12 months

    • Ghostalmedia@lemmy.world
      link
      fedilink
      English
      arrow-up
      11
      ·
      edit-2
      10 months ago

      Crazy idea…

      Phone OS developers often fight with carriers about the network labels that get displayed on a phone’s status bar. Carriers often demand a certain name and label to be shown.

      Apple does some shitty stuff, but they have often been able to strong-arm carriers into industry-wide customer experience improvements, because they have a monopoly on iOS and have fast OS update adoption. Apple should just push a software update that always shows bandwidth instead of “4G,” “LTE,” “5G.” Then they should update their maps app to show crowd sourced bandwidth speeds across a carriers’s network.

      Air their dirty laundry and watch them squirm.

      • thecrotch@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        2
        arrow-down
        1
        ·
        10 months ago

        Good idea on theory but it would have to constantly be doing speed tests in the background and those eat up a ton of bandwidth. All the phone knows is what kind of network it’s connected to and what kind of signal strength it has

        • Ghostalmedia@lemmy.world
          link
          fedilink
          English
          arrow-up
          3
          arrow-down
          1
          ·
          10 months ago

          Cellular networks a can already monitor bandwidth, signal strength, packet loss, etc. They just need to expose that data to the public. There is no need for extra “speed tests.” The network’s speed can be measured during an upload / download to a phone.

          • thecrotch@sh.itjust.works
            link
            fedilink
            English
            arrow-up
            3
            ·
            10 months ago

            That’s not an effective metric because you don’t know the network speed of the host that the user was downloading from. It’s impossible to tell if the network is slow, or the site they visited was throttled to .5mb. speed tests work because the server you’re downloading from is a known entity

  • Ghostalmedia@lemmy.world
    link
    fedilink
    English
    arrow-up
    15
    ·
    edit-2
    10 months ago

    Honestly, this is the same shit the telcoms have been doing for decades. They also did it with the previous generations.

    When telcoms started promoting “3G” it was a mix between networks with proper broadband speeds, and edge networks that were more like 2.5G. 4G was an even bigger dumpster fire with a very wide array of “fourth generation” specs that ranged from glorified 3G to actual next generation speeds. And 5G is a repeat of this marketing bullshit trend.

    You can really see the effects of this if you get to rural coverage areas. Your phone might say it’s on 5G or 4G, and you might be experiencing shit speeds even if you have decent reception. You might be on a part of the network that the marketing department considers 4 or 5G, but doesn’t mean it’s actually fast.

    IMHO, we need consumer protection laws that prevent companies from using brand names or generational buzz words to trick customers. Network speeds should be advertised in bits per second, or standardized BPS chunks.

    • collapse_already@lemmy.ml
      link
      fedilink
      English
      arrow-up
      8
      ·
      10 months ago

      Cell carriers in the US releasing 3G+ technologies branded as 4Gs should have gotten the FTC on a crackdown, but regulatory capture and it is all just marketing fluff. The sales flacks selling it can’t even answer questions like “what kinds of bandwidth can I expect to see? Do I get a minimum QoS?”

        • intensely_human@lemm.ee
          link
          fedilink
          English
          arrow-up
          2
          ·
          10 months ago

          Up to a trillion gigabits per second, or less, guaranteed. Some restrictions apply. See store for details. Offer may not be redeemed on days ending in Y. Offer does not exist. Void where prohibited.

  • Gravitywell@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    11
    arrow-down
    1
    ·
    10 months ago

    Comcast can’t even do symmetric speeds. I’m not sure what locations have thier best speeds but in my area, where they compete with the much more affordable but not as large coverage area offerings of fiber. The idea that they could offer even a signle gigabit level service to the majority of their customers is laughable.

    I bet it did lead to a lot of confusion especially when you called up for 10GIGABITS and got offered plans in the Megabits with usage limits and overage fees and all kinds of complicated shit. I called in to cancel my service a few months back when i moved to an area with fiber again, they said “we offer gigabit too you know” and i was like , nah you kinda don’t actually, but even if you did its like 3 times as expensive for just the download speeds.

    • SaltySalamander@kbin.social
      link
      fedilink
      arrow-up
      4
      ·
      10 months ago

      Comcast offers 2gigabit in the town I work in. So yea, they kinda do offer it in certain areas. You are correct though, very limited upload speeds.

  • xyguy@startrek.website
    link
    fedilink
    English
    arrow-up
    10
    ·
    10 months ago

    I was genuinely convinced they offered 10gig service in some markets. Doesn’t surprise me that its all marketing nonsense.

    Just a tip for anyone who wants to know, if you have Comcast business internet they’ll tell you you have to use their modem but, you can swap it out with a 3rd patty modem and use the live chat service to get it activated. Then you can send back their modem for free at a ups store. Every salesperson will tell you its not possible but it absolutely is.

  • kent_eh@lemmy.ca
    link
    fedilink
    English
    arrow-up
    11
    arrow-down
    1
    ·
    edit-2
    10 months ago

    Wireless “G” labeling has always mostly been marketing wank anyway.

    The actual technology has used more pragmatic (if less marketing friendly) terminology.

    • Ghostalmedia@lemmy.world
      link
      fedilink
      English
      arrow-up
      6
      ·
      10 months ago

      Absolutely. 3G, 4G, 5G - they’re all a mess. Each G is a wild mix of specs with wildly varying speeds. And many parts of a next generation network are a glorified version of the previous generation network with no large generational speed bumps.

      Government organizations like the FCC should force telecoms to advertise speeds as bits per second.

      • linearchaos@lemmy.world
        link
        fedilink
        English
        arrow-up
        3
        ·
        10 months ago

        It’s tricky though, do they advertise their maximum speed in all areas? Or the minimum speed? Or the average speed?

        If you have 50 megabit service in New York City with multiple millions of people can you then offer 3G speeds to the rest of the state and still advertise it is 5G?

        I get 45 in town, is it a birthday party the other day and I could barely get 1.

        • Ghostalmedia@lemmy.world
          link
          fedilink
          English
          arrow-up
          2
          ·
          10 months ago

          The same problem exist today with access to 4G, LTE, 5G or 5G mm wave coverage in an area. Service is going to change based upon your exact location.

          Regulators should just tell telecoms do to exactly what they do today - provide customers a coverage heat map. But base it average bandwidth at the network node, not what technology their marketing department has decided to call the node’s hardware.