Hello,

Just spent a good week installing my home server. Time to pause and lookback to what I’ve setup and ask your help/suggestions as I am wondering if my below configuration is a good approach or just a useless convoluted approach.

I have a Proxmox instance with 3 VLAN:

  • Management (192.168.1.x) : the one used by proxmox host and that can access all other VLANs

  • Servarr (192.168.100.x) : every arr related software + Jellyfin (all LXC). All outbound connectivity goes via VPN. Cant access any VLAN

  • myCloud (192.168.200.X): WIP, but basically planning to have things like Nextcloud, Immich, Paperless etc…

The original idea was to allow external access via Cloudlfare tunnel but finally decided to switch back to Tailscale for “myCloud” access (as I am expected to share this with less than 5 accounts). So:

  • myCloud now has Tailscale running on it.
  • myCloud can now access Servarr VLAN

Consequently to my choice of using tailscale, I had now to use a DNS server to resolve mydomain.com:

  • Servarr now has pihole as DNS server reachable across all VLAN

On the top of all that I have yet another VLAN for my raspberry Pi running Vaultwarden reachable only via my personal tailscale account.

I’m open to restart things from scratch (it’s fun), so let me know.

Also wondering if using LXCs is better than docker especially when it comes to updates and longer term maintenance.

  • just_another_person@lemmy.worldEnglish
    13·
    1 month ago

    Not saying physical switches are needed for security, which is why I was asking for clarification. Doing all of this on a router doesn’t make sense without a physical separation though. That’s my point. If the router gets owned, they have access to all networks anyway. If the idea is just for traffic direction and shaping, then I’m confused why the bridged pihole.

    • curbstickle@lemmy.dbzer0.comEnglish
      21·
      1 month ago

      Doing all of this on a router doesn’t make sense without a physical separation though

      I’m going to have to say, I have zero idea why you would suggest this for something that is logical, and specifically not physical.

      Logical separations and vlan segregation for trust models is standard practice (though hopefully more will trend towards a zero trust model, but irrelevant here). There is zero need for any physical separation. What are you talking about?

      • just_another_person@lemmy.worldEnglish
        13·
        1 month ago

        Friend…you clearly are not reading what I’m saying. Not one single sentence that I’ve typed suggested there needs to be, or ever was a physical separation. That is why this setup without clarification doesn’t make much sense if security is the goal.

        You are saying exactly what I’m saying and arguing about it for some reason.

        • curbstickle@lemmy.dbzer0.comEnglish
          22·
          1 month ago

          Your first sentence was about physical switches…

          There already is a logical separation that makes perfect sense - out through VPN with no network access initiated by that VLAN to the other two internal. That’d a security step that’s pretty clear and valid off the bat.

          So again - I don’t follow anything of what you’re driving at, no. Because from the first sentence in your first comment forward isn’t making any sense.

          Please, clarify, because I don’t know why you’d even bring up different switches for an extremely basic logical separation.

          • just_another_person@lemmy.worldEnglish
            14·
            1 month ago

            VLAN on a singular router without physical separation is not secure. OP was asking for feedback, that’s my feedback. It’s accurate.

            • athes@lemmy.worldOPEnglish
              2·
              1 month ago

              Thx for the feedback, I don’t have multiple router no. If I had would it be still called VLAN? I thought the V was Virtual for achieving that LAN segmentation with one router. With one router, don’t you think the security added is the same level as configuring a firewall on each VM/LXC ?

              • just_another_person@lemmy.worldEnglish
                13·
                1 month ago

                Well it wouldn’t matter if your router is the thing that someone gets into. All you’re doing is separate traffic in different subnets, and if that’s your goal, you’re good to go.

                • curbstickle@lemmy.dbzer0.comEnglish
                  21·
                  1 month ago

                  You are aware that a firewall rule is how you would address - in software, with logic - someone trying to get from VLAN C to VLAN A, right?

                  That its part of the method you’d use as a layer of security to prevent someone gaining access to.your router?

                  Assuming the router is compromised from the start is similarly just nutso.

                • curbstickle@lemmy.dbzer0.comEnglish
                  2·
                  1 month ago

                  Because the overwhelming majority of multiple vlan use, and proper use at that, is going to be managed by a single firewall at the end. Because that firewall is going to manage intra and inter vlan communication, and to suggest that requires a different physical router is… Wild.

                  Because logical network design - regardless of egress - is a vital component of any security implementation.

                  Because having a multiple egress solution that doesn’t rely on a software based connection (VPN) would be absolutely bonkers for a self hosted solution at home.

                  There are just… So many things that are absolutely buck wild crazy to me in what you’ve said. And not in a fun ‘yee haw’ kind of way, but a “boy oh boy if that could be bottled it would sell like hotcakes on the street” sort of way.