No probs. I’ll post it on waifuhunter.club. It’s the only server I’m on. Elsa content is allowed and wanted there so if you got fresh stuff…sharing is caring, k?

Thanks. I somehow straight-up ignored gitattributes and can’t recall to have seen them in projects. Glad that’s past tense now and I will add presets from your link where appropriate (If I remember it). Never had conflicts with windows users on linux based repos but I suspect thats VSCodes merit in keeping the files as-is.

The two commands in your post are not mentioned in the linked repo-readme but instead in the github docs (see [1]).

I know git reset only from dealing with a detached HEAD. I did not understand the situation as well as the git reset command. Both is explained very good in [2].

So here’s the gist of my research (possibly wrong).

Before you even add the .gitattributes file you should add all unstaged changes, commit & push them. To quickly revert back when things go wrong: zip the whole project.

git rm --cached -r: Normally git rm would remove a file from the filesystem in addition to the repo but the --cached says to only remove/untrack the file from the repo (what’s inside the .git dir). Recursively removes every file. Cleans the current staging area too. So at this point you’d have to do git add again for every file but you wouldn’t have lost any uncommitted changes in the working dir.

Now for the dangerous part:

git reset --hard This resets the HEAD to the most recent commit (and cleans the staging-area/index which was already done in the in git rm) and in addition possibly overwrites many unstaged/uncommitted changes with the files contents from the last commit.

So to end this novel. If you havent commited everything before executing the commands your in for a bad time. As far as I see it.

[1].

[2]

Rejoice folks. I think I found a retoot on Mastodon. Direct image-links should work as it’s all within the fediverse, right?

It’s been nearly 4 years since I last used Manjaro and I had that error quite often around ever ½-¼ a year in my 2 years of Manjaro. iirc to resolve it I had to uninstall the current nvidia driver > restart without driver > install supported kernel > install driver. Don’t know what I did wrong tho.

Manjaro did otherwise a good job to keep the sys together.

What bugged me a bit was the painfully long retention of the big KDE updates. At that time KDE was making big QOL leaps and quite a few distros had those updates already. But I could also live with that.

In the last month of my time with Manjaro a few Proton games dropped frames heavily and that’s the end of the story. Made the switch to Arch and never had probs with nvidia again, apart from when new Steam UI came out.

Ah thanks for letting me know. Scrambled sounds dire. Spreadsheets or documents?

Thought the devs nailed it pretty good. At least I never saw differences in my not overly complicated letter layouts when I opened them in MS Office.

Though I had your use-case just with a few rather simple spreadsheets I got from colleagues for me to modify and send back, they never complained.

Anyways I’m glad I don’t have to do with office products very often but I’ll look into OpenOffice as well. Looks indeed very good. Like a streamlined and modern MS Office without ribbons.

OnlyOffice is mentioned so rarely but it has an UI much more resembling the ribbon based MS Office and in my experience a good compatibility with docx and xlsx files. Don’t know what’s happening when confronted with macro-monsters though.

Downgrading seemed really easy to me with the mentioned downgrade script. With the IgnorePkg option in pacman.conf it won’t get updated. I did it with nvidia drivers when Steam pushed their new UI and nvidia drivers weren’t ready for that.

What’s dissapointing about the fix? Does its job or not?

yay SEARCHTERM

It spits out all the packages with SEARCHTERM in its name or description. The packages are listed like “REPO/PACKAGE” , where REPO tells you if it’s from the official repos (core/extra/multilib) or from the AUR.

Then pick the number of the package from the list and that’s it.

If you want to update all your packages, even the AUR ones just enter yay and press enter on the follow-up questions. If you update with pacman -Syu then AUR packages won’t get updated.

Also Octopi is a nice frontend for yay and pacman. Not as fancy as Discover or Pamac but it does its job well.

I just installed Nextcloud on Arch and the official packages caused the most headaches I ever had within my 3 years of arch. In contrast I installed the official Jellyfin and Prometheus Server packages and they ran OOTB.

I ended up with not using the official packages but extracting the tar.bz2 into /var/www/nextcloud and slightly modifying the nginx config from their site. I had to move the inclusion of the MIME-Types file to a different block for nextcloud to deliver its CSS, SVGs and images. It wasn’t exactly straight-forward too considering permissions. I found it a beast compared to many other server software.

From my experience (2 years Manjaro, 3 years Arch) it’s the other way round. Manjaro presented me with a terminal way to often after Nvidia updates. Never had that on Arch. Especially the Nvidia updates are very reliable. I don’t know what people do with their Arch installations. Mines rock-solid for the 3 years now. Possibly the most stable distro I ever used.

But I understand that you just can’t advise newbies to install Arch, even when archinstall is relatively easy to use. Maybe EndeavourOS which brings a lot of convenience features and a graphical installer to the table. A fellow linux newb is running it without problems for a year now.

That’s not just YT. A lot of services and apps (e.g. amazon or xitter) you’re logged into and share links from add parameters (stuff behind the questionmark) to the link that identify in the end who has shared it.

Try to shave off as much as possible from a shared link and test if it still works. To get a feel for what you can delete from the link, try to navigate to the destination (e.g. YT-video) inside a browser with which you’re not logged into that service and which has preferrably cleared its history, cache etc. Then compare the link from that browser with the one from the browser you’re logged in with.

At least FFB for my basic saitek gamepad works out of the box in proton games and even in some emulators like dolphin. Haven’t had steering wheels or pedals but always wanted. They are surely a different beast to reverse engineer. I have no doubt racing gear manufacturers will increasingly take care of linux compatibility with the momentum in linux gaming. And then there are all these OSS wizards already working on the most exotic HW. SteamDeck I don’t know. I don’t see that many linux steamers sadly.

I’m a bit of a reverse engineer myself (insert william dafoe meme) and had a successful pull request for controlling rgb lighting on my headset. Nothing compared to steering wheels or the like but I never did reverse engineering before and knew just a little C and it worked and was fun. Thing was I needed Windows to monitor the USB data when switching stuff in the OEM software.

Yeah it’s great. I use it for youtube and twitch and I don’t need more than the volume, mute, forward/backward and fullscreen keys to use it. Never touched Lua. Do you use it with MPV yourself?

This comment explains Egypts stance it in the last paragraph.

Thanks for understanding. Didn’t want to disrespect your inclination to Firefox. Everyone should use what they like best. And I sure don’t want to sound preachy…but…YOU’RE MISSING OUT BIG TIME! Can I come in for just a moment to tell you about your path to a better life?

“Simple things should be simple but complex things should be possible” (Alan Kay)

Vivaldi’s UI is pretty minimal by default and can be minimized even more. Heck you even can hide the tab- and url-bar and completely navigate with F2. You can call it a day and keep using it like that or you go on to create mouse gestures, quick commands or themes, you set the key combos, configure the look of your speed dial and add search engines. That’s my last try, Neo. Do you take the red or the blue pill?

Windows 7 is yolo for a business. Support ran out in January 2023. But I guess it’s some hardware it needs to support, right?

Had that for a few years in my life too. The enterprise ran on Windows Server, MS Dynamics, MS VPN, Exchange etc. and the Dynamics Server could not be upgraded for years because so much depended on it. It was a tremendous effort to do it at the end.

I already used QEMU which was a heck more complicated than VirtualBox, although I got MacOS Big Sur running with acceptable speed at the end. Sadly no-joy with NVidia single GPU passthrough in the apple garden. But I plan to do it for Windows 10 because I want that fucking 1TB NVMe that the big ass of my Windows install is hibernating on for the second year.

What GPU are you using and if it’s Nvidia, was it difficult to enable?

Okular is the MPV of documents it seems. Regarding file-formats and UI. I only use it for PDF’s and I honestly had no clue it can read e-books and so much other formats. Even docx and odt with plugins. Also didn’t knew it has 3 dark-modes. Tyvm for your post.

AFAIK the Same situation with KDE Connect which I couldn’t properly exist without. Also KRunner & Dolphin. Kate would be possible but hard AF.

Full on agree with KRunner. One of the MVP applications of KDE. So far none of the alternatives I tried on Windows 10 and MacOS come anywhere close to its power and elegance. Maybe Alfred which I tested years ago.

I could write 10 more paragraphs about why KRunner is one of the most advanced laucher/search/command application but I think everyone should experience it themselves. Best not to over-do it with the KRunner-plugins where an overwhelmingly long search result list could ruin your experience.

I went to MS forums for remembering how to write “sfc /scannow”, “Dism /Online /Cleanup-Image /CheckHealth”, because it was often the first answer on a post. How-To’s concerning “bootrec” and “diskpart” were always to be found somewhere else. At least with sfc and dism it was always pray and hope it does something useful under the hood.

With an unbootable Linux partition (which seldomly happens) I mount it, chroot it and then have a plethora of fixes I can try, tools I can use and logfiles I can check instead of putting my self in the hands of 2-3 blackbox-apps. Manual fixing under Windows is possible but nobody can tell me it’s feasible with the repair console.