I always check stuff like this with new appliances, but I guess there’s some people who don’t…

  • 0x4E4F@infosec.pub
    link
    fedilink
    English
    arrow-up
    25
    arrow-down
    1
    ·
    edit-2
    1 year ago

    I woul’ve just cut it and extended it… and find out in the process that there is more to that cable than meets the eye.

      • helpImTrappedOnline@lemmy.world
        link
        fedilink
        arrow-up
        8
        ·
        1 year ago

        If you know how to re-wire stuff properly, it’s conceptually an easy process (some devices can be tricky to take apart).

        For example, on that toaster you can replace the cable with a longer one, put a new plug on it if that gets worn out, or if absolutely needed splice the cable with another one (that’s for when the device can’t be opened up for some reason)

        Unplug toaster before cutting the power cord, or any other maintenance, such as cleaning the 3 years of crumb its collected.

        The most preferred method is to replace the entire cable, the wires connect inside the device somewhere, probably with simple screw terminals. Replace the whole cable and you don’t have to worry about any weak points in the splice or insulation, because there are none.

        The danger is when you don’t know how electricity and wiring works or get lazy and take shortcuts.

        There’s a bunch that can go wrong, some of them have potentially life ending consequences, which is why it’s a bad idea to work on electronics…unless you take the time to learn how they work and be smart about it.

        • Decoy321@lemmy.world
          link
          fedilink
          arrow-up
          6
          ·
          edit-2
          1 year ago

          Thank you for that interesting read. Seems like quite a lot of effort and risk for a cheap toaster.

          • helpImTrappedOnline@lemmy.world
            link
            fedilink
            arrow-up
            7
            ·
            1 year ago

            For a cheap toaster, yes, I wouldn’t bother either unless it was the best toaster ever. But for more expensive things, like an air fryer, power tools, vacuums, any thing with sentimental value… it is a great skill to learn how to do safely.

            Just replacing a broken plug on an extension cord can save you big, the good cords are going for $20+, a new plug is closer to $2 (although replacing the plug removes its safety for outdoor use as it’s no longer a water tight seal).

            Its usually cheaper to replace the damaged part than the whole unit.

          • Gabu@lemmy.ml
            cake
            link
            fedilink
            arrow-up
            5
            ·
            1 year ago

            Seems like quite a lot of effort and risk for a cheap toaster.

            It really isn’t - if you have the technical knowledge.

            • Obi@sopuli.xyz
              link
              fedilink
              arrow-up
              3
              ·
              1 year ago

              And if you do chances are you’d happily take other people’s cheap toasters and repair them just for the fun of it.

      • 0x4E4F@infosec.pub
        link
        fedilink
        English
        arrow-up
        4
        ·
        1 year ago

        If the cable is too short, yeah… that or just change the cable, depends how complicated disassembly of the appliance is.

    • QuinceDaPence@kbin.social
      link
      fedilink
      arrow-up
      4
      ·
      1 year ago

      Same. Also, countertop appliances should always have at least a 3’ cord. I believe that’s part of electrical code.