• mtdyson_01@lemmynsfw.com
    link
    fedilink
    English
    arrow-up
    133
    arrow-down
    1
    ·
    27 days ago

    Well now wait a minute, the Corvette on top may be correct. The car manufacturer puts so many covers on the bottom of cars now the hot wheels might be accurate.

  • kerrigan778@lemmy.world
    link
    fedilink
    arrow-up
    73
    ·
    27 days ago

    This seems accurate to what modern car underbodies look like, a smooth underbody is very important for aerodynamics and therefore fuel efficiency. For race cars it is often even more important not only for fuel efficiency but for downforce.

            • Trainguyrom@reddthat.com
              link
              fedilink
              English
              arrow-up
              4
              ·
              26 days ago

              In the north there’s even people who will specifically head south to buy a car that’s never spent a winter driving on salted roads. Road salt corrodes so badly it’s nasty

                • Trainguyrom@reddthat.com
                  link
                  fedilink
                  English
                  arrow-up
                  1
                  ·
                  26 days ago

                  I think for some people it’s more about killing multiple birds with one stone. One guy I know went to see a Dolphins game, bought a car and got some warmer weather during the coldest part of the year. Another bought a car while visiting family (and learned the hard way that radiators are sometimes refilled with water and therefore will freeze in the winter if brought north) and another had their 20 year old truck die while hauling their RV and bought a new truck from the nearest dealership. So maybe it’s not widespread, but every one has talked about the benefits of a car that’s never seen salted roads

          • MonkderVierte@lemmy.ml
            link
            fedilink
            arrow-up
            1
            ·
            edit-2
            26 days ago

            Salt only lowers melting point around 4°C, below is split. The occasional fire for heating the engine on the other hand…

            Edit: Rollsplit being loose gravel.

            • Dozzi92@lemmy.world
              link
              fedilink
              arrow-up
              2
              ·
              26 days ago

              I don’t pretend to be an expert on salt (though I have certainly listened to the testimony of experts on salt), but I do know there are different compounds that all fall under the general heading of “salt,” despite some of them not being salt at all. And that heading is probably one coined by a layman like myself.

              As far as whether the other compounds are responsible for corrosion the way tradition salt would be, I have no idea!

              • dual_sport_dork 🐧🗡️@lemmy.world
                link
                fedilink
                arrow-up
                1
                ·
                26 days ago

                Typically they are – for two of the same reasons, first being that most of the “salt alternatives” in use, the original “salt” in this case being sodium chloride, are also chlorides (potassium or calcium chloride, usually) and it’s that chlorine ion that’s corrosive. They also all turn the meltwater into an electrolyte, forming an easy electrical connection between the various metals in your vehicle’s parts and dramatically accelerating galvanic corrosion.

                Technically any compound composed of positive and negatively charged ions that balance out to a net neutral is a salt, chemically speaking, and by definition they are compounds, i.e. held together with weak ionic bonds via their electrostatic charges and not molecules held together with strong covalent bonds. This means they like to liberate their constituent ions easily, allowing whatever-it-is they’re composed of to readily react with something else.

                TL;DR: Pretty much all salts, not just sodium chloride salt salt, are corrosion promoters.

      • A7thStone@lemmy.world
        link
        fedilink
        arrow-up
        2
        ·
        26 days ago

        All of those plastic covers are a detriment in the north east. All of the salt and sand gets inside of them then you can’t clean it out.

  • Jesus@lemmy.world
    link
    fedilink
    arrow-up
    55
    ·
    27 days ago

    Apparently, in order keep the “die cast” label, either the base or the top are die cast.

    Some cars are plastic on top and metal on the bottom, and others are metal on top and plastic on the bottom.

    As I recall, the wheels are also no longer 4 separate axel pins. They’re just two long pins. One in the front, one in the back.

  • Track_Shovel@slrpnk.net
    link
    fedilink
    English
    arrow-up
    44
    arrow-down
    1
    ·
    27 days ago

    I had a jeep that changed colours from army green to bright yellow. Also an old school caddy that went from purple to pink. All metal; great toys

    • ouRKaoS@lemmy.today
      link
      fedilink
      arrow-up
      29
      ·
      27 days ago

      I had a couple with spring loaded “crash damage”, one on the side and one on the rear. When it got hit hard enough, the panel would flip around and the car would be “dented”.

      Was awesome.

      • theangryseal@lemmy.world
        link
        fedilink
        arrow-up
        7
        ·
        27 days ago

        Awww man you just unlocked a memory of mine. I had several of those.

        Also, like the other person who replied to you, I had He-Man toys that did that. I’m like 90% sure it was Skeletor and He-Man.

        • ouRKaoS@lemmy.today
          link
          fedilink
          arrow-up
          7
          ·
          27 days ago

          I had “Thunder Punch” He-man who had a little backpack that took the circle 6-shot caps. You twisted his torso & got a BANG! with the punch.

          The 80’s were a time

    • ColonelPanic@lemm.ee
      link
      fedilink
      arrow-up
      3
      ·
      27 days ago

      They still make them. Still metal too. My 3 year old has a few and loves them. I have some old ones and they still work, albeit not as fast as they used to.

  • IninewCrow@lemmy.ca
    link
    fedilink
    English
    arrow-up
    34
    ·
    27 days ago

    Hot wheels from the 70s and 80s were deadly weapons … you stepped on one it was like stepping on a roller skate, you broke one it turned into knife and if you threw one, you could cause a concussion. Even just opening up one of those damned things when you were kid usually meant you severely cut yourself (I know from experience).

      • IninewCrow@lemmy.ca
        link
        fedilink
        English
        arrow-up
        18
        ·
        27 days ago

        I have one or two hot wheels shaped wounds somewhere on my skull from when my brothers tossed these things at me in a fight … and I returned the favor as well.

    • thermal_shock@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      ·
      26 days ago

      yup. since my kid was born, we’ve collected them. about 500 last count, all inside, never played with in sand. matchbox ones are cooler though, more real world cars in my opinion.

  • A_Union_of_Kobolds@lemmy.world
    link
    fedilink
    arrow-up
    18
    ·
    27 days ago

    For anyone looking for a fun way to play with your toy cars, I highly recommend the free tabletop game GASLANDS. Glue some guns to them and blow them up with your friends!

  • Farid@startrek.website
    link
    fedilink
    arrow-up
    11
    arrow-down
    2
    ·
    27 days ago

    Some hypercars actually have a flat undercarriage to maximize aerodynamics. Also not all HotWheels are depicting real cars, so they might not have realistic underbody. This could be one of those 2 cases.

    • falcunculus@jlai.lu
      link
      fedilink
      arrow-up
      2
      ·
      edit-2
      27 days ago

      It says Corvette C7 Z06 on the top one, so it can easily be compared to the underbody of the real one, which doesn’t really look like that.

      • Farid@startrek.website
        link
        fedilink
        arrow-up
        1
        ·
        26 days ago

        Oh yeah, I didn’t zoom in to check. Just assumed it was unreadable. Z6 does in fact has stuff on the belly, according to Google image search.